Ukucaciswa
| I-T5L0 ASIC | Ithuthukiswe yi-DWIN.Ukukhiqizwa okukhulu ngo-2020,1MBytes Nor Flash ku-chip, 128Kbytes isikhala sokulondoloza esishintshashintshayo sokushintshana kwedatha nge-OS CPU Core nenkumbulo.Bhala kabusha umjikelezo: izikhathi ezingaphezu kuka-100,000 | ||
| Umbala | 262K imibala | ||
| Uhlobo lwe-LCD | TN, TFT LCD | ||
| I-engeli yokubuka | I-engeli yokubuka evamile, inani elivamile elingu-70°/70°/30°/40°(L/R/U/D) | ||
| Indawo yokubonisa (AA) | 154.08mm (W)×85.92mm (H) | ||
| Isixazululo | 800×480 | ||
| Ukukhanya kwangemuva | I-LED | ||
| Ukukhanya | DMG80480F070_01WN: 250nit | ||
| DMG80480F070_01WTR: 200nit | |||
| Uhlobo | I-RTP (Iphaneli yokuthinta engazweli) | ||
| Isakhiwo | Ifilimu ye-ITO + ingilazi ye-ITO | ||
| Imodi yokuthinta | Iphoyinti lokusekela ukuthinta nokuhudula | ||
| Ukuqina Kobuso | 3H | ||
| I-Light Transmittance | Ngaphezu kuka-80% | ||
| Impilo | Amachashazi > izikhathi ezingu-1,000,000;I-Stroke > izikhathi ezingu-100,000;150g amandla, emuva futhi phambili kubalwa ngokuphindwe kabili | ||
| Amandla kagesi | 3.6~5.5V | ||
| Ukusebenza Kwamanje | I-VCC = +5V, i-Backlight ivuliwe, 410mA | ||
| VCC = +5V, I-Backlight ivaliwe, 115mA | |||
| Izinga Lokushisa Lokusebenza | -10℃~60℃ | ||
| Izinga Lokushisa Lokugcina | -20℃~70℃ | ||
| Umswakama Osebenzayo | 10%~90%RH, inani elijwayelekile elingu-60% RH | ||
| I-Baudrate | 3150 ~ 3225600bps | ||
| I-Voltage ephumayo | Okukhiphayo 1, Iout = 8mA;3.0~3.3V | ||
| Okukhiphayo 0, Iout =-8mA;0~0.3V | |||
| I-Voltage yokufaka(RXD) | Okokufaka 1;3.3V | ||
| Okokufaka 0;0~0.5V | |||
| Isixhumi esibonakalayo | UART2: TTL; | ||
| I-UART4: TTL; (Itholakala kuphela ngemva kokucushwa kwe-OS) | |||
| I-UART5: TTL; (Itholakala kuphela ngemva kokucushwa kwe-OS | |||
| Ifomethi Yedatha | I-UART2: N81; | ||
| I-UART4: N81/E81/O81/N82;Izindlela ezi-4 (ukucushwa kwe-OS) | |||
| UART5: N81/E81/O81/N82;Izindlela ezi-4 (ukucushwa kwe-OS) | |||
| Isokhethi | 50Pin_0.5mm FPC | ||
| I-Flash | 8M Amabhayithi | ||
| I-PIN | Incazelo | I/O | Incazelo Esebenzayo |
| 1 | +5V | I | Ukunikezwa kwamandla, i-DC3.6-5.5V |
| 2 | +5V | I | |
| 3 | GND | GND | GND |
| 4 | GND | GND | |
| 5 | GND | GND | |
| 6 | AD7 | I | 5 okokufaka ama-ADC.Ukulungiswa kwe-12-bit esimweni sokuhlinzekwa kwamandla ka-3.3V.0-3.3V okokufaka i-voltage.Ngaphandle kwe-AD6, enye idatha ithunyelwa ku-OS core nge-UART3 in isikhathi sangempela ngesilinganiso sesampula esingu-16KHz.I-AD1 ne-AD5 ingasetshenziswa ku parallel, kanye ne-AD3 kanye ne-AD7 ingasetshenziswa ngokuhambisana, okulingana nokubili 32KHz isampula AD.I-AD1, AD3, AD5, AD7 ingasetshenziswa ngokuhambisana, okuthi ilingana ne-AD yesampula engu-64KHz;idatha ifinyezwa izikhathi ezingu-1024 futhi bese ihlukaniswa ngo-64 ukuze kutholwe inani le-64Hz 16bit AD ngokwenza amasampula amaningi. |
| 7 | AD6 | I | |
| 8 | AD5 | I | |
| 9 | AD3 | I | |
| 10 | AD1 | I | |
| 11 | +3.3 | O | Okukhiphayo okungu-3.3V, umthwalo omkhulu ongu-150mA. |
| 12 | I-SPK | O | I-MOSFET yangaphandle yokushayela ibhaza noma isipikha.I-resistor yangaphandle engu-10K kufanele idonswe phansi ukuze kuqinisekiswe ukuthi amandla okukhanyisa asezingeni eliphansi. |
| 13 | SD_CD | IO | I-SD/SDHC interface, I-SD_CK ixhuma i-capacitor engu-22pF ku-GND eduze isixhumi esibonakalayo sekhadi le-SD. |
| 14 | SD_CK | O | |
| 15 | SD_D3 | IO | |
| 16 | SD_D2 | IO | |
| 17 | SD_D1 | IO | |
| 18 | SD_D0 | IO | |
| 19 | I-PWM0 | O | 2 16-bit PWM okukhiphayo.I-resistor yangaphandle engu-10K kufanele yehliselwe phansi umhlabathi ukuqinisekisa ukuthi amandla okusebenza asezingeni eliphansi.I-OS core ingalawulwa ngesikhathi sangempela nge-UART3 |
| 20 | I-PWM1 | O | |
| 21 | P3.3 | IO | Uma usebenzisa i-RX8130 noma i-SD2058 I2C RTC ukuze uxhume kuwo womabili ama-IO, i-SCL kufanele ixhumeke ku-P3.2, futhi i-SDA ixhunywe ku-P3.3 ngokuhambisana ene-10K resistor pull-up to 3.3V. |
| 22 | P3.2 | IO | |
| 23 | P3.1/EX1 | IO | Ingasetshenziswa njengokuphazamiseka kwangaphandle okokufaka okungu-1 ngesikhathi esifanayo, futhi isekela kokubili izinga le-voltage ephansi noma izindlela zokuphazamiseka konqenqema olulandelanayo. |
| 24 | P3.0/EX0 | IO | Ingasetshenziswa njengokuphazamiseka kwangaphandle okokufaka okungu-0 ngesikhathi esifanayo, futhi isekela kokubili izinga le-voltage ephansi noma izindlela zokuphazamiseka konqenqema olulandelanayo. |
| 25 | P2.7 | IO | I-interface ye-IO |
| 26 | P2.6 | IO | I-interface ye-IO |
| 27 | P2.5 | IO | I-interface ye-IO |
| 28 | P2.4 | IO | I-interface ye-IO |
| 29 | P2.3 | IO | I-interface ye-IO |
| 30 | P2.2 | IO | I-interface ye-IO |
| 31 | P2.1 | IO | I-interface ye-IO |
| 32 | P2.0 | IO | I-interface ye-IO |
| 33 | I-P1.7 | IO | I-interface ye-IO |
| 34 | I-P1.6 | IO | I-interface ye-IO |
| 35 | I-P1.5 | IO | I-interface ye-IO |
| 36 | I-P1.4 | IO | I-interface ye-IO |
| 37 | I-P1.3 | IO | I-interface ye-IO |
| 38 | P1.2 | IO | I-interface ye-IO |
| 39 | I-P1.1 | IO | I-interface ye-IO |
| 40 | I-P1.0 | IO | I-interface ye-IO |
| 41 | UART4_TXD | O | UART4 |
| 42 | UART4_RXD | I | |
| 43 | UART5_TXD | O | UART5 |
| 44 | UART5_RXD | I | |
| 45 | P0.0 | IO | I-interface ye-IO |
| 46 | P0.1 | IO | I-interface ye-IO |
| 47 | CAN_TX | O | I-CAN interface |
| 48 | CAN_RX | I | |
| 49 | UART2_TXD | O | I-UART2 (UART2 imbobo ye-serial ye-OS core) |
| 50 | UART2_RXD | I |
